[TowerTalk] Plastic End Caps
Jeff Carter
towertalk at hidden-valley.com
Mon Apr 21 15:42:28 EDT 2008
When last this came up for me (I was rebuilding both a Cushcraft R7
and a A4S) I found the following:
http://cableorganizer.com/heat-shrink-end-caps/
They worked like a charm. I took N8DE's suggestion and sealed the
openings with silicone prior to using the end caps, but it was
probably overkill.
The ones I ordered had sealant inside of them that melted when the cap
shrank, so near-perfect sealing was achieved.
Good luck,
Jeff/KD4RBG
---- Original message ----
>Date: Mon, 21 Apr 2008 14:25:48 -0400
>From: n8de at thepoint.net
>Subject: Re: [TowerTalk] Plastic End Caps
>To: Bob Maser <bmaser at tampabay.rr.com>
>Cc: Towertalk <towertalk at contesting.com>
>
>I use foam rubber balls [with a happy face on them] place INSIDE the
>end of the boom. Usually available at 'Dollar' stores for .... a
>Dollar!
>
>As for the element end caps .... here I go again : Silicone Seal ...
>fill the end of the element with some.
>
>Don
>N8DE
>
>Quoting Bob Maser <bmaser at tampabay.rr.com>:
>
>> I am in need of some 3" plastic boom caps and some 1/2" element end caps.
>> Anyone have some or could direct me to a source?
>>
>> Bob Maser W6TR
>> Valrico, FL
More information about the TowerTalk
mailing list