[TowerTalk] LM-470 and a T2X Rotor

[Bob Maser]

I have a rotor plate for the 470 and the standard(non-HD) 354.  It is cut 
out for a prop pitch but could probably be modified to work with a T2X.  It 
is of no use to me as I have a 354HD.

Bob W6TR
----- Original Message ----- 
From: "donhall161" <donhall161 at sbcglobal.net>
To: "Bill Gaines AD8P" <ad8p at wcoil.com>; <towertalk at contesting.com>
Sent: Wednesday, December 03, 2008 4:35 PM
Subject: Re: [TowerTalk] LM-470 and a T2X Rotor


> Bill,
>
> The LM470 and the LM354 both have the same top section.
>
> I have had a T2X in my 354 for all its life. Fitting it in requires a
> special mounting plate to clear the side braces.
> It has spacers to raise it up to allow clearance.
>
> Check Tashjian towers for the one needed or see if someone on this 
> reflector
> has an extra.
>
> 73  Don  K5AQ
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk