[TowerTalk] wx proof connector

[Pete Smith]

Small split bolts for copper wire are another good solderless alternative, 
particularly for high power.  Available at Home Depot, etc.  They also make 
a mechanically strong connection.

73, Pete N4ZRAt 11:42 AM 12/7/2008, Wayne Kline wrote:

>
>   For low band 160. a quick coax to wire is either little copper bugs or 
> the tried a true  " ideal plastic wire nut "  BTDT
>
>    Wayne W3EA
>
> > From: WA6RKN at ARRL.net> To: towertalk at contesting.com> Date: Sun, 7 Dec 
> 2008 08:07:48 -0800> Subject: Re: [TowerTalk] wx proof connector> > Pair 
> of Powerpoles?> > ----- Original Message ----- > From: <KI9A at aol.com>> 
> Subject: [TowerTalk] wx proof connector> > > > Gang-> > I'm looking for 
> ideas of a quick disconnect, so I can do this when I get > > on> > 160 
> for contests. Outside of soldering, then de-soldering, I am drawing a> > 
> blank on what would be a good connector to use.> > 
> _______________________________________________> > > > 
> _______________________________________________> TowerTalk mailing list> 
> TowerTalk at contesting.com> 
> http://lists.contesting.com/mailman/listinfo/towertalk
>_________________________________________________________________
>Suspicious message? There's an alert for that.
>http://windowslive.com/Explore/hotmail?ocid=TXT_TAGLM_WL_hotmail_acq_broad2_122008
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk at contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk