[TowerTalk] kt34xa flat swr

[K7LXC at aol.com]

In a message dated 12/31/2007 9:48:00 P.M. Pacific Standard Time,  
towertalk-request at contesting.com writes:

>  I new there was something wrong with my kt34xa when I had  trouble with 
the linear on 15 meters. 20 and 10 meters work fine . The swr is  as always. But 
15 is 1.1 to 1 except at band edges where it goes up just a  little. Haven't 
been on 15 for a long time so don't know when it started.  Could it be the 
balun or maybe something just came loose. Never had a swr on a  beam go 
completely flat on one band just the opposite really  high.


         I don't see the  problem. Where are you measuring the swr? To 
eliminate any possible problems,  measure the swr at the end of the coax before it 
goes in to anything else. 
 
Cheers,
Steve     K7LXC
TOWER TECH



**************************************See AOL's top rated recipes 
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)