[TowerTalk] Cushcraft R5 sealing of the traps, What sealant

Bill Winkis kc4pe at mindspring.com
Mon May 19 07:17:13 EDT 2008


The world of shrink tubing has come a long way...look at the 
below  address....just skimming the ad I see tubing at 3" offered 
.... I use their HD adhesive type on all my connectors and it is 
something else....I took a piece 2 foot long applied it to RG213, 
weighted it on a set of lab scales......then shoved it into a flower 
vase filled with water.....pulled it after 30 days, dried it. an put 
it on the scales......Zero weight gain.....so..Judge for your self......

http://www.buyheatshrink.com/heatshrinktubing/4to1polyolefin.htm#B

-Bill

At 04:40 PM 5/18/2008, Roger (K8RI) wrote:

>Marc Tessier - VE3TES wrote:
> > Hello what I did was remove the shrink tubing all together and 
> reinstalled newer stuff, the type I was able to get my mitts on had 
> a similar sealant like the original tubing had. The manufacturer 
> name is Raychem, Part # TCS2-15/17 Now this stuff was a bit larger 
> than actually needed, so look for stuff about 35% larger than the 
> area you wish to cover, i.e. if the coil is 1.25" try for stuff 
> that is 1 5/8" or similar in size in non shrunk dimensions...Most 
> heat shrink tubing specs will give min and max diameter size before 
> and after heating...
> >
> >
>Good industrial grade heat shrink will  shrink to about 25-30% of the
>original size.   IOW, from 0.88" original size (really closer to an
>inch) to 0.22" minimum after shrinking for the 3M stuff.  I don't think
>that is made in large enough sizes to go over those traps though.  OTOH
>the stuff available out there covers a wide range of quality and size.
>
>Good Luck,
>
>Roger (K8RI)
> > Good luck with your R5, and if you need any other info I maintain 
> a web page mostly devoted to the R7 , but many of the traps used on 
> the R7 are used on the R5...
> >
> > 73 and hope to meet you on air soon !!!
> >
> > Regards,
> >
> > Marc Tessier - VE3TES
> > My R7 page= http://home.cogeco.ca/~ve3tes
> > http://www.eqsl.cc/Member.cfm?VE3TES
> > ve3tes at cogeco.ca
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk at contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> >
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk at contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk



More information about the TowerTalk mailing list