[TowerTalk] Yaesu G-800SA Problem

Craig Thompson craig at thompsonet.com
Tue Sep 2 22:18:10 EDT 2008


I have a G-800SA and thought I had some problems with my control unit....I now have a spare if anyone wants one. Anyhow, you can eliminate the control unit from the troubleshouting with a 12 VDC power supply. Just apply the 12 VDC to the motor wire and watch it turn. Reverse to see it turn the other way. Put a ohm meter on the potentiameter connection and watch it change. If it does all that, it is the control unit. Check the output connector for the correct rotor voltage as you switch directions on the control unit. 

Good luck, Craig K9CT


More information about the TowerTalk mailing list