[TowerTalk] UST HDX555 motor drive
K7LXC at aol.com
K7LXC at aol.com
Wed Apr 8 05:44:00 PDT 2009
In a message dated 4/7/2009 7:26:48 P.M. Pacific Daylight Time,
n9lah at comcast.net writes:
> I have an HDX-555 tower with the motor drive for lifting. I was working
on the coax recently and wanted to put the tower in the fully extended
position the motor ran very very slow and just hummed before it tripped
the circuit. I reset the breaker and tried to bring the tower down. That
worked just fine. As the tower came to a stop I tried to raise it again
and it went up just fine. I waited a couple of seconds and tried the up
direction again and it tripped the circuit.Is it possible that the
starting capacitor is getting weak and can only energize the motor with
help from gravity when coming down and that it will then go up as the
motor has been energized? Maybe being in the outside environment, the
contacts between motor and capacitor need to be cleaned up???
I've never heard of a motor failing in the very intermittent amateur
duty so I'm thinking it's your wire size and voltage drop. Try a bigger
extension cord and see what happens. Of course going down is much easier with
gravity on your side.
Cheers,
Steve K7LXC
TOWER TECH
**************Feeling the pinch at the grocery store? Make dinner for $10 or
less. (http://food.aol.com/frugal-feasts?ncid=emlcntusfood00000001)
More information about the TowerTalk
mailing list