[TowerTalk] R25G vs. large antenna

[Hector Garcia XE2K]

TT's
Where  can read or get the information  how much change  in the SQ FT  Rate  if the top good  guy have the torque arm stabilizer  with the 6 guys  will give the same 60ft  25g ?
I think  that tower will handle a bigger tribander  or big LOG Periodic  plus the 2 ele 40m  antenna on TOP  with that set up, but will like to have the numbers.

J. Hector Garcia XE2K / WT6J

   Mexicali B.C  DM22fp

P.O.Box 73 

El Centro CA 92244-0073

USA

http://www.xe2k.net

http://www.dxxe.org

--- On Tue, 8/18/09, K7LXC at aol.com <K7LXC at aol.com> wrote:

From: K7LXC at aol.com <K7LXC at aol.com>
Subject: [TowerTalk] R25G vs. large antenna
To: towertalk at contesting.com
Date: Tuesday, August 18, 2009, 6:31 PM

Howdy, TowerTalkians --
 
    This thread contained lots of anecdotal information  and I found it 
surprising that NO ONE mentioned what the tower spec from the  manufacturer is. 
 
    Sixty feet of 25G (I think that was the height of  interest) is rated 
for 16.9 square feet @ 70 MPH, 10.2 sq.ft. @ 90 MPH and 8.2  sq.ft. @ 110 
MPH. In any case it looks like you're covered. 
 
    In the future, _www.rohnnet.com_ (http://www.rohnnet.com)  has an 
online catalog with  these specs. And as always, follow the LXC Prime Directive 
to "DO what the  manufacturer says."
 
Cheers,
Steve    K7LXC
TOWER TECH 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk