[TowerTalk] TH3MKII vs 3 element SteppIR
Rick Stealey
rstealey at hotmail.com
Mon Jul 13 05:59:41 PDT 2009
did you
> have the sense that you were putting more stuff in the air and increasing
> the risk to the tower coming down in a storm.
It's one antenna vs two. The boom is only 2 ft longer than the HyGain. Yes the elements are full size on 20, so a little more torque compared to the TH3 but you don't have the other dipole, so subtract that.
I doubt there is any tower that can't support a 3 ele SteppIR.
You get to eliminate a feedline, get more gain on the WARC bands,
reduce the amount of rotor wear and tear.
You should have no problem assembling it in a day. You mount the housings on the boom, fit the poles together, tape them, attach them to the housings, and hook up 12 wires. No measuring, cutting, drilling.
The only thing I caution you about is to make absolutely certain you get the wiring right. Then check it again, then have three friends check it for you, then check it again. If you cause a short or criss cross some wires you can damage the controller. Make sure the cable can't get pinched when the rotor turns.
Get the picture? Then standby for some real fun when you get on the air.
Rick K2XT
_________________________________________________________________
Windows Live™ SkyDrive™: Get 25 GB of free online storage.
http://windowslive.com/online/skydrive?ocid=TXT_TAGLM_WL_SD_25GB_062009
More information about the TowerTalk
mailing list