[TowerTalk] rotor plate

[John Kemker]

Had the exact same problem with my 25G and the rotor plate.  Had to cut 
some of the cross-pieces up near the top to get it to fit in.


Dave Johnson wrote:
> I have installed or worked on more than 50 Rohn towers in my 34 years as a ham but this is a new one on me.  I was installing a used 25G tower for another ham and he had bought a new rotor plate but it wouldn't fit in the top section.  I thought there must be something wrong with that plate so I brought it home and tried it in a top section that I have here.  It fit perfectly.  I have several old Rohn 25 rotor plates so I tried one of them in his top section and still no joy.  This top section is to small at the place near the top where the rotor is supposed to go.  Has anyone seen this before?
>
> Dave - K4SSU
>   


-- 
--JohnK
73 de W5NNH
10X 75371/M&M 117/SMIRK 6185/Six Club 285/TRA 2499/Norcross 228 F&AM




---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 090606-0, 06/06/2009
Tested on: 6/6/2009 11:14:50 PM
avast! - copyright (c) 1988-2009 ALWIL Software.
http://www.avast.com