[TowerTalk] Identifying Aluminum Tower

[n8de at thepoint.net]

Alan,
The best determining factor is the tower section length.

8-foot length sections are Heights,
10-foot length sections are Universal.

Aluma tower makes some, too, but not familiar with that brand and  
their products.

73
Don
N8DE

Quoting Alan Fryer <N3BJ at cox.net>:

> I have an older aluminum tower that I would like to use, but not   
> sure of the manufacturer.  Thought it was a Heights, but the leg   
> diameters are different than shown in their current designs.  The   
> 22" wide sections have 1.5" diameter legs and the 18" wide sections   
> are 1.25" in diameter.  Maybe it's an older Heights design ?
>
> Can anyone help ?  I also have a super heavy duty hinge base that   
> looks like it could be used as a fold over with an Acme screw   
> arrangement.
>
> Thanks,
>
> Alan, N3BJ
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>