[TowerTalk] Coax soldering

[Steve Katz]

I use a balun for this.  PL-259/SO-239 connection for the coax, loop terminals for the balanced line.  Strong, weatherproof, easy....

WB2WIK/6

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com]On Behalf Of W1JCW
Sent: Wednesday, October 21, 2009 1:32 PM
To: TowerTalk at contesting.com
Subject: [TowerTalk] Coax soldering



Hi guys -

What is your preferred way to solder an open wire feeder on say RG8 or RG213 ?

I know some cut the brand down the middle, solder it at the base and work their way to the tip.
Some twist it then solder or flatting it.

I am looking to try something new.

Suggestions ? 

73-
W1JCW
John
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk