[TowerTalk] Tailtwister Rotor Rehab Question

[K7LXC at aol.com]

As far as Hy-Gain-type rotators greasing goes,  Hy-Gain recommends an 
all-purpose grease - something that's not very thick and  not thin. You want it 
to stick to the bearings without gumming them up. I think  they suggested a 
lithium grease. (I'm going on memory and experience here - I  don't have a 
manual to look at.) They also suggest an amount equal to a  thimbleful of 
grease. Any more is too much. 
 
    If you live in an area where it freezes, you may  want to use a 
snowmobile grease for it's low temp capability. 
 
Cheers,
Steve    K7LXC
TOWER TECH