[TowerTalk] Where should the nuts go?

[k2qmf at juno.com]

Between the legs.....

Of the tower that is!!!

 
On Tue, 13 Apr 2010 16:22:11 -0400 "B. Nowak" <n8snm at comcast.net> writes:
> If I remember correctly, two nuts below the baseplate.  One nut below 
> is ok 
> if mortar is used below baseplate.
> This was detailed in the drawing package I received.
> 
> Brad - N8SNM
> ----- Original Message ----- 
> From: <K7LXC at aol.com>
> To: <towertalk at contesting.com>; <fserota at msn.com>
> Sent: Tuesday, April 13, 2010 2:00 PM
> Subject: Re: [TowerTalk] Where should the nuts go?
> 
> 
> >
> > In a message dated 4/13/2010 10:20:10 A.M. Pacific Daylight Time,
> > towertalk-request at contesting.com writes:
> >
> >>  Just putting up a new TX455. The base plate comes with 3  nuts 
> on each
> > long
> > bolt embedded in the concrete. Question is: Do 2 nut  belong below 
> the
> > baseplate for locking the level, and one nut above the  plate, or 
> the 
> > other
> > way around with one nut below and 2 nuts  above?
> >
> >    The weight of the tower will keep the bottom nuts  from going 
> anywhere.
> > You double nut the top of the bolts to make sure they  won't go 
> anywhere
> > either.
> >
> > Cheers,
> > Steve    K7LXC
> > TOWER TECH
> > UST Factory authorized installer
> >
> >
> >
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk at contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk 
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
 
____________________________________________________________
Penny Stock Jumping 2000%
Sign up to the #1 voted penny stock newsletter for free today!
http://thirdpartyoffers.juno.com/TGL3141/4bc4d9aa9168522d4c1st03vuc