[TowerTalk] Cap for Brake delay unit.

[Dennis Vernacchia]

Ron,

Thanks for the link to article on Brake Delay circuit for Ham II, III or IV
rotators.

To clarify further for those hams not working in teh electronics industry,
you might clarify the following....

The schematic shows the relay contacts N.C. ( Normally Closed )

But the description seems to indicate that the relay contacts are N.O.(
Normally On )
then CLOSE when brake lever is initially depressed

Since many of us have adequate relays in our Junque inventories,
please clarify which state the relay is in when not energized in case we
substitute our own relays

Also, can you tell us what the relay contact Voltage and Current ratings are
?

73, Dennis N6KI

On Wed, Apr 14, 2010 at 8:33 AM, ronald schmid <rollie4x4 at sbcglobal.net>wrote:

> They are easy to make if you need to
>
> http://forums.qrz.com/showthread.php?t=241675
>
> RON / N6DCN
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>