[TowerTalk] Digging holes for anchor rods
chas
chasm at texas.net
Wed Apr 28 11:12:37 PDT 2010
Jim Brown wrote:
> On Wed, 28 Apr 2010 09:20:01 -0400, Mark Robinson wrote:
> What matters is 1) the ANGLE between the guy wire and the tower which should
> be held at Rohn's recommendations, and the horizontal angle between the guys,
> which should be close to 120 degrees.
>
> 73,
>
> Jim K9YC
Jim, don't you reckon that if you had to sacrifice one vs the other that the
support every 120* on the compass is probably more important than the
distance out from the base to the support pipes? as long as the latter
exceeds the 80%?
In fact, here on the coast, I really think that the compass spread is a lot
more important considering that with a hurricane, flat winds, downbursts and
all that sort of thing that we have down here... can come from every
direction... iow, forget trying to guy against assaults from prevailing
directions. sure as shooting, you will get something from your weak side!!
thanks
chas
--
chasm at texas.net k5dam Houston, TX
http://militarysignatures.com/signatures/member14013.png
--
More information about the TowerTalk
mailing list