[TowerTalk] Crimp type UHF Connectors for LMR-600?...and BuryFlex
Hector Garcia XE2K
j_hector_garcia at sbcglobal.net
Tue Feb 9 18:34:02 PST 2010
Roger
I bought this ones and have in use several in my LMR 600 cables, no problem and the price is fine for me, LMR original or the CONEX are more expensive
http://www.l-com.com/item.aspx?id=21005
J. Hector Garcia XE2K / WT6J
Mexicali B.C DM22fp
P.O.Box 73
El Centro CA 92244-0073
USA
http://www.xe2k.net
http://www.dxxe.org
--- On Tue, 2/9/10, Roger (K8RI) <K8RI-on-TowerTalk at tm.net> wrote:
From: Roger (K8RI) <K8RI-on-TowerTalk at tm.net>
Subject: [TowerTalk] Crimp type UHF Connectors for LMR-600?...and BuryFlex
To: "Tower and HF antenna construction topics." <towertalk at contesting.com>
Date: Tuesday, February 9, 2010, 6:28 PM
The N-Connector thread started me wondering where I can find at least 6
or 8 UHF connectors for LMR-600. Mot clamp type list nigh onto to $60
or more, where as I can find good quality crimp type, N-Connectors for
$12 to $13 plus. There are 7/16 DIN much less expensive than those UHF
for LMR-600, but they still have to fit the antenna on one end and the
rig on the other.
I have also run into a problem with some crimp UHF connectors not having
a large enough center pin to fit LMR-400 or Bury Flex. In the past the
ones I had would fit LMR-400, LMR-400UF, and Davis BuryFlex
73
Roger (K8RI)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list