[TowerTalk] [YCCC] Dual rotor controllers

[Tony Brock-Fisher]

Ted-

My solution was to add an Idiom Press EZ-Rotor mod with serial IO to the 
rotor control. Now I can control the rotor from any PC on the net. (I 
actually have all three of my rotor on serial ports).

-Tony

----- Original Message ----- 
From: <k2qmf at juno.com>
To: <towertalk at contesting.com>; <yccc at yccc.org>
Sent: Wednesday, February 24, 2010 7:40 PM
Subject: [YCCC] Dual rotor controllers


> Hello All,
>
> I asked this question years ago and got replies.
> However, I can't find them.  Guess they are on an
> old computer.
>
> Anyway,  I would like to know how I can connect
> two (2) controllers to one antenna rotator???
>
> The rotator is a HAM-4 and I have 2 controllers.
>
> I want to be able to control the rotor from 2 different
> operating positions...
>
> As I recall, you need to take the fuse out of one of
> the controllers.  I don't remember anything else...
>
>
> Any help would be very much appreciated.
> Thank in advance.
>
> 73,
> Ted  K2QMF
>
> P,.S. - I tried the archives with no luck.
> ____________________________________________________________
> Senior Assisted Living
> Put your loved ones in good hands with quality senior assisted living. 
> Click now!
> http://thirdpartyoffers.juno.com/TGL2141/c?cp=7EABkAGHgyj9SYLGBMm_uAAAJ1BnGn6THZj3zb9oqpzij_rqAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAASUQAAAAA=
> _______________________________________________
> YCCC Reflector mailto:yccc at contesting.com
> Yankee Clipper Contest Club  http://www.yccc.org
> Reflector Info: http://lists.contesting.com/mailman/listinfo/yccc
>
>