[TowerTalk] KT34XA

Dino Darling dino at kx6d.com
Mon Jul 26 11:40:56 PDT 2010


The fact that 15 and 10 are good, this tells me the tips are not the
correct length.  Check those again and post a SWR curve.

Remember, when you tune any tri-bander (for the most part), you start
with 10, then 15 (which uses the 10 and 15 sections), then lastly, 20
meter which is everything PAST the second set of capacitors...which are
the tips! :-)

Dino - KX6D
 
 
-------- Original Message --------
Subject: [TowerTalk] KT34XA
From: Larry Smith <73n4fd at gmail.com>
Date: Thu, July 22, 2010 6:05 am
To: towertalk at contesting.com

I have converted a KLM KT34XA to a KT36XA and have run into a problem
with
SWR on 20 meters. The SWR curves are almost flat on 15 and 10 but the 20
meter curves are wacky. The resonance is no where around 14 MHz but
begins
to improve around 16 MHz.
Element/capacitor lengths have been rechecked several times and appear
to be
correct.
Any thoughts or suggestions.
Thanks.

Larry
N4FD
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



More information about the TowerTalk mailing list