[TowerTalk] CDE Rotor meter not operational

[Jim Hargrave]

Marc,

D1 is a 13v zener diode. Mine has a 12v in it and has plenty of adjustment.
D2 is a plain rectifier diode, 1N4000 variety will work fine.

I have a HAM II user manual. If you need a copy, I can scan it for you.

I don't have info on the brake delay board, since I have modified mine and
installed a RotorEZ board for computer control.
I use mine for my Prop Pitch motor and don't use the brake circuits.

   73 de Jim
     W5IFP

> -----Original Message-----
> From: towertalk-bounces at contesting.com
> [mailto:towertalk-bounces at contesting.com]On Behalf Of Marc Tessier
> Sent: Saturday, June 12, 2010 1:08 PM
> To: towertalk at contesting.com
> Subject: [TowerTalk] CDE Rotor meter not operational
>
>
> I have an older CDE Ham II Control box that the meter circuit no
> longer functions, I would like to know if anyone knows the values
> for D1 and D2, One appears to be a zener diode the other a
> regular one. Upon opening my control box I found a BD-189 break
> delay board just sitting inside that was never installed by the
> previous owner, I guess he had planned to install it at a later
> date , but forgot he put it there, and it has since taken out
> both diodes. If you have some information for me I would be very
> grateful to hear from you either on or off the list...
>
> Also I would love to know what the connection points or
> installation information is for this BD-189 brake delay is as well
>
> Thank you in advance...
>
> Regards,
>
> Marc Tessier - VE3TES
> ve3tes at cogeco.ca
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk