[TowerTalk] M2 6M5X balun testing?
Rich Hallman - N7TR
rich at n7tr.com
Sun Jun 20 15:10:02 PDT 2010
I found the issue. The center pin solder joint was bad inside the
T=Match hub. Pulled the silicon gunk out and re-soldered....put
antenna back on the tower and working fine.
Thanks....
Rich
-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Rich Hallman -
N7TR
Sent: Saturday, June 19, 2010 8:26 PM
To: towertalk at contesting.com
Subject: [TowerTalk] M2 6M5X balun testing?
I installed one of my 6 M5X's after being on the ground for a year or so
and am seeing High SWR now. Anyone try or have an idea how to test the
center balun that has the phasing line that attaches to it?
Ill call M2 Monday...but wanted to see if anyone knows how the internal
of the balun center hub is wired.
Thanks...
Rich N7TR
ex KI3V, N3AMK, WB3JOV
www.n7tr.com <http://www.n7tr.com>
Telnet: dxc.n7tr.com N7TR DXCluster
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list