[TowerTalk] wall plate jack for the 8 wire rotor cable

[n8de at thepoint.net]

Cinch-Jones makes panel connectors of the type you desire.
They are sometimes available on eBay .. prices can be steep.

73
Don
N8DE


Quoting "Kurt Cathcart, KR2C" <Kurt at KuhlRoad.Net>:

> Currently I have my Hy-gain rotor cable coming through a hole in a
> stainless steel wall plate with  a grommet.  I have wound up on the
> floor a bunch of excess cable before it goes to the control box.  Does
> anybody make a good connector that I could mount in the wall plate so
> that I can use a shorter jumper cable from the wall to the control box?
> this way I wouldn't have to worry too much if I should re-arrange the shack.
>
> -Kurt
> KR2C
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>