[TowerTalk] Control Cable Connector for Yaesu 450A rotor

[k6ye at q.com]

There are at least two possible solutions to ponder. I see connectors, from time-to-time, on Ebay. HRO sells a 100+ foot length of cable with both connectors attached. I am sure there are other opinions. Good luck in your quest.

Semper Fi,

Tommy - K6YE
DX IS


----- Original Message -----
From: Rev Grant Nicholls <revgrantnicholls at gmail.com>
To: towertalk at contesting.com
Sent: Mon, 22 Aug 2011 20:24:09 -0400 (EDT)
Subject: [TowerTalk] Control Cable Connector for Yaesu 450A rotor

Not sure if it was my fingers or the email last time!  Here is the 
message without errors!

"

After a hiatus of several years I put the rotor up on a 50 tower this weekend only to find out the little plastic connector and pins are not on the control box end of the control cable.  Tried all over to find a plug- Yaesu will gladly supply one for nearly the price of a cheap rotor. Anyone out there who can solve my problem from their junk drawer? 73 and thanks in advance.

May God bless your day.

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk