[TowerTalk] G-2800SDX Question

[Jim McDonald]

The manual calls for six stranded conductors of at least #22 each if shorter
than 131 feet or #18 if longer.  It says "If your cable had different sizes
of wire, connect the largest wires to pins 4 and 5, since these carry the
motor current."

I use #18 for my run which is about 180', I think.

Jim N7US



-----Original Message-----


Thanks again to evryone for their suggestions on getting this operational
again. Operational it is. One final question I have is which two pins on the
rotor unit itself require the two heavier duty cable leads? Rick VE9HF