[TowerTalk] G-2800SDX Question

[K0DAN]

The motor windings, PINS 4 and 5.

The MANUAL can be found here ;-)

http://yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=104&encProdID=E0526A9F285ECCF36F75CC3FEC992990&DivisionID=65&isArchived=0


----- Original Message ----- 
From: "Williams, Richard (OAG/CPG)" <Richard.Williams at gnb.ca>
To: <towertalk at contesting.com>
Sent: Monday, August 22, 2011 7:37 AM
Subject: [TowerTalk] G-2800SDX Question


> Thanks again to evryone for their suggestions on getting this operational 
> again. Operational it is. One final question I have is which two pins on 
> the rotor unit itself require the two heavier duty cable leads? Rick VE9HF
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk