[TowerTalk] Splice 1/2 in Hardline?

[Edwin Karl]

I won't address the splice, be it a male and female "N" end, a regular 
splice, etc.

But I would suggest getting a tube of caulk, slitting it, and placing 
the splice
inside the tube of caulk. Cheap but effective watertight seal.

"Good Luck, we're all counting on you ..."

73

ed K0KL

On 7/10/2011 9:18 PM, Rich Hallman - N7TR wrote:
> My fence guy was using an auger to drill fence posts and was going to hand dig where we thought my hardline was buried to the tower.  I was in town when he started and he "forgot" what we discussed and sure enough he hit the two runs of Andrews ½ inch hardline going to the tower.
>
>
>
> So.....What options do I have for slicing in a jumper?  I have extra ½ inch hard line available to splice in.
>
>
>
> Thanks...
>
>
>
> Rich N7TR
>
> ex KI3V, N3AMK, WB3JOV
>
> www.n7tr.com<http://www.n7tr.com>
>
> Telnet: dxc.n7tr.com N7TR DXCluster
>
>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1388 / Virus Database: 1516/3756 - Release Date: 07/10/11
>
>