[TowerTalk] Which crimper die for which connector
Bert Almemo
balmemo at sympatico.ca
Tue Jun 7 05:38:07 PDT 2011
Hi Pete,
Here is a size chart that might be of help.
http://www.rfparts.com/picts/1505_chart.jpg Good luck!
73 Bert, VE3NR
-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Pete Smith
Sent: Tuesday, June 07, 2011 7:45 AM
To: TowerTalk
Subject: [TowerTalk] Which crimper die for which connector
I bought a crimping tool at Dayton with two dies, but the openings in the
dies are identified only by dimensions, not by the connector they are to be
used on. I've tried Googling without success, but suspect there must be a
table somewhere that I can use for reference - any ideas?
--
73, Pete N4ZR
The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at
reversebeacon.blogspot.com, spots at telnet.reversebeacon.net, port 7000
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list