[TowerTalk] Rotor help

[Jim W7RY]

I have the exact same problem. But shouldn't you be putting this question to 
the N1MM group?

73
Jim W7RY


--------------------------------------------------
From: <JWKIMBALL at aol.com>
Sent: Tuesday, June 14, 2011 2:41 PM
To: <towertalk at contesting.com>
Subject: [TowerTalk] Rotor help

> I have my M2 RC 2800PX talking to my computer in N1MM but it ain't
> listenin'. I can manually turn the rotor from the control box. The N1MM 
> will  show
> the direction. If I command a turn from N1MM the display blinks as does 
> the
> main N1MM window and I get a message on the bottom of the N1MM rotor
> display  saying "unknown message returned". It should be working because 
> the moon
> is big  now!
>
> IC7600 with micro Keyer II. Using Windows 7 with USB to serial  adapter.
>
> Tnx
> 73
> Jim
> K5AUP
> Metro Zellwood FL
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1382 / Virus Database: 1513/3702 - Release Date: 06/13/11
>