[TowerTalk] LM354 motor winch

[Mickey Baker]

A wiring diagram is easy - Leeson has them on their web site. 

I used the Leeson washdown duty motor - it will last longer outdoors.

Reliably switching the motor requires a hefty switch. I deployed a boat lift switch that included a momentary drum switch, GFI circuit, weatherproof box and a stainless plug. 

Mickey N4MB

On May 15, 2011, at 10:07 AM, Doug Dietz <dcdietz at chartermi.net> wrote:

> ,
> I listen I learn....  
> My tower is a lm354hd it is also used, someone had a motor on it and it has been removed.  I have all the drawings and the spec of the motor it is a lesson 112431 .500 motor.  I should also mention that I have the 40:1 gear box and the drummer winding the cable is also there.  The motor pulley is speced at a.625x1.750, and the belts a 4l410 gates 2410, what I don't have is the number of the pulley on the gearbox I assume that it is in the drawing of the gearbox drum assy I know that it is a 10inch and I can get the shaft size off the reducer so I need a number off the 10 inch pulley and a wiring diagram.  anyone HELP  Doug WD8Z dcdietz at chartermi.net
> 
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk