[TowerTalk] u clamp sizes for phyllistran?

[john at kk9a.com]

Phillystran compresses a lot, so I use a slightly smaller cable clamp than
the actual cable size.  If I recall correctly, HPTG-2100I is .22 diameter
and I use 3/16 clamps. HPTG-4000I is .30 diameter and I use 1/4 clamps.  I
only use cable clamps on boom trusses, where Big Grips are not practical.

John KK9A


To:	towertalk at contesting.com
Subject:	 [TowerTalk] u clamp sizes for phyllistran?
From:	 Brian Alsop <alsopb at nc.rr.com>
Date:	 Thu, 30 Aug 2012 11:50:43 +0000

Guys,

I have various pieces op phyllistrad and wish to use it for boom support
and other purposes.

Need to know the proper size U clamps for:

T1200
HPTG 2100I
HPTG 4000I

I haven't had any luck determining the dimensions of the various U
clamps. For example just what dimension is 3/16 on a 3/16" clamp?

Yes I know about big grips.  There appear to be none for T1200.
73 de Brian/K3KO