[TowerTalk] u clamp sizes for phyllistran?

[Brian Alsop]

Thanks info guys.

Having an interesting time determining clamp size for T1200.  It has an 
OD of .17".  It seems that an 1/8" (.125") clamp would be too small. 
That leaves only 5/32" (.156") clamps if they exist.

On 8/30/2012 12:34, john at kk9a.com wrote:
> Phillystran compresses a lot, so I use a slightly smaller cable clamp than
> the actual cable size.  If I recall correctly, HPTG-2100I is .22 diameter
> and I use 3/16 clamps. HPTG-4000I is .30 diameter and I use 1/4 clamps.  I
> only use cable clamps on boom trusses, where Big Grips are not practical.
>
> John KK9A
>
>
> To:	towertalk at contesting.com
> Subject:	 [TowerTalk] u clamp sizes for phyllistran?
> From:	 Brian Alsop<alsopb at nc.rr.com>
> Date:	 Thu, 30 Aug 2012 11:50:43 +0000
>
> Guys,
>
> I have various pieces op phyllistrad and wish to use it for boom support
> and other purposes.
>
> Need to know the proper size U clamps for:
>
> T1200
> HPTG 2100I
> HPTG 4000I
>
> I haven't had any luck determining the dimensions of the various U
> clamps. For example just what dimension is 3/16 on a 3/16" clamp?
>
> Yes I know about big grips.  There appear to be none for T1200.
> 73 de Brian/K3KO
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2197 / Virus Database: 2437/5235 - Release Date: 08/30/12
>
>



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2197 / Virus Database: 2437/5235 - Release Date: 08/30/12