[TowerTalk] connecting more than one stubs

[Jim Lux]

On 11/21/12 5:20 AM, Kostas SV1DPI wrote:
> David tnx for quick reply. Ok with the switch and i can trim the stubs
> for the switch's length but can i connect more than one stub in one
> T-connector? To make that clear i have a switch with 4 positions. Can i
> switch at position 1 for 10m and have there both 23' and 11' stub
> connected? That would be perfect but i  am not sure if it is ok...
>

sure you can do that, the feedline doesn't know the difference between a 
switch and a T connector.

If you had a switch like the RCS-8V, you could have 5 stubs and switch 
them in and out in any combination, as well.