[TowerTalk] Yaesu Rotators

[Pete Smith N4ZR]

And not incidentally, the DC motors in later Yaesus are essentially 
fail-safe.  My G-800SA has a locking rocker switcxh for controlling the 
direction of turn, and I have occasionally left it driving the rotator 
against one or the other stop literally for days, with no harm to 
anything but my ego.

73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.

On 11/30/2012 6:02 AM, Henk PA5KT wrote:
> Tom,
>
> That will not work.
> The G-450 is an AC motor, the G-800 is DC.
>
> 73 Henk PA5KT
>
> Op 28-11-2012 20:56, Tom Horton schreef:
>> I don't have the schematics or data available but am curious if a 
>> Yaesu  G-800 controller will control a Yaesu G-450 rotor.
>> Thanks for any info.
>>   Tom K5IID
>>
>> There is no joy in Mudville!
>>
>>
>>
>>
>>
>> K5IID Tom Horton  Hillsboro, TX
>>
>> E sorter for ARRL W5 bureau
>>
>> Same call for 55 years!
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>