[TowerTalk] Crank up tower bracing rubbing against cable
SPWoo
jj_2_woo at yahoo.com
Fri Oct 19 14:20:36 EDT 2012
Hi All,
Thank you the replies. I also received many replies in private. Many of you suggested of bending the bracing with a crow bar or hitting it with a piece of wood. Well, I tried both methods today and neither of them worked. I would need a really long crow bar to bend that thing. The wood method didn't work as the wood absorbed all the pounding.
I have an idea that might work and save me a lot of time. My tower is very close to my driveway. I could tie a cable to the bracing and attach the other end to a winch or a vehicle. With a 300-500lb force I should be able to bend the bracing just enough to clear the interference. When retracted the tower should be able to withstand the pulling force, I hope. Since I don't have a winch I will have to ask my neighbors for help. I will report back on my progress and result. Thanks and 73.
Best Regards,
Jonathan Woo, W6GX
(970) 646-1711
More information about the TowerTalk
mailing list