[TowerTalk] RE2: Tex Com LMR-600 Connectors

Sun Aug 4 17:20:02 EDT 2013

I put some on 4 runs of LMR-600 about 3 weeks ago.   I presume these are the
quick connect with push the center pin in.
After a brief learning curve with the stripper tool they all went on without
a hitch. 
Do make sure you de-burr the center connductor properly and the press the
coax hard into the connector, until it pops or snaps into the properly
inserted position.  I found if you did not get that tactile pop or snap the
center pin and center conductor were not properly seated.

73  Mike K9MK

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
rfman45
Sent: Sunday, August 04, 2013 3:28 PM
To: towertalk at contesting.com
Subject: [TowerTalk] Tex Com LMR-600 Connectors

Texas Towers has a compression UHF connector for LMR 600, the CC600UM. I'd
like to know if anyone has used this connector, its ease of use, etc.

Thanks in advance for any comments.

                                                        Mike  W2LO 

_______________________________________________

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk