[TowerTalk] shrink w/adhesive

[Ron W8RJL]

I've been water proofing coax connectors for years the old school way (with no problems). I'm ready to try the new shrink tube with adhesive which seems like a good way to go. I just measured a PL-259 shell diameter at about 0.7 inches. I see the shrink rate is about 3:1 so I assume 1" diameter should work for a PL-259 with RG-213. I also noticed on eBay some manufacturers state that the shelf life is only about a year or less so it might be wise to buy just what you need as opposed to stocking up. I've seen references to 3M and Molex brands. Any comments/recommendations appreciated. If this topic has already been beat to death you can reply direct 73, Ron W8RJL email (w8rjl at arrl.net)