[TowerTalk] Rohn 45AG4 guy tabs?

[john at kk9a.com]

It's not a problem at all if you just drop two of the top guys when 
installing the antenna.

John KK9A


To:"Mark Robinson" <markrob at mindspring.com>, "Jay Kesterson" 
<k0gu at verinet.com>
Subject:Re: [TowerTalk] Rohn 45AG4 guy tabs?
From:"Jim W7RY" <w7ry at centurytel.net>
Reply-to:Jim W7RY <w7ry at centurytel.net>
Date:Fri, 16 Aug 2013 17:11:20 -0700

I agree. Having the guys on the top plate is a real pain. My first Rohn 25 
was like that. It was very frustrating installing a beam with a tram system.
Install a guy ring 4-5 feet down the tower.
73
Jim W7RY



-----Original Message----- From: Mark Robinson
Sent: Friday, August 16, 2013 1:59 PM
To: Jay Kesterson
Cc: TowerTalk at contesting.com
Subject: Re: [TowerTalk] Rohn 45AG4 guy tabs?

Yes I believe that they can be used to secure the guys. I chose not to do
this since it is already cluttered up there and having the guys attached to
the top plate makes working on the antennas more difficult.

The angled down guy anchor points on the top plate made a good point to
secure the coax loop though.

I mounted my top guys several feet below the top plate.

73 Mark N1UK