[TowerTalk] Rebar base for new 18HT installation?
Wayne Kline
w3ea at hotmail.com
Mon Jan 21 15:01:18 EST 2013
Hi Alan I did a combination. I used the three tubes but drilled them ladder fusion, with the 3/8 rebar protruding 6" each side and three bars a side. they have been in place since 1992 and at one time had 4" of radial ice with 30 to 50 mph wind gusts. All 4 Hi Tower were striped of there aluminum tubing but the BX section towers and bases were intact. The other 11 Monoband antennas on other towers meet the same Fate. ( Tomato Stakes :( ) Wayne W3EA
> Date: Mon, 21 Jan 2013 11:19:33 -0600
> From: n5xz at earthlink.net
> To: towertalk at contesting.com
> Subject: [TowerTalk] Rebar base for new 18HT installation?
>
> I'm wondering if I need to install a rebar base for my new 18HT tower, or go with the standard "base tube assemblies" per the installation manual. The manual does state: "For extra security, steel reinforcing rods can be added to the base before the concrete is poured."
>
> Tower will be installed in sandy soil (Texas Gulf Coast) and I am not currently planning to guy it.
>
> Recommendations from the group?
>
> Allen Brier N5XZ
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list