[TowerTalk] 40-2CD question

[Jorge Diez - CX6VM]

Thanks Stan

Mine is 40-2CD and is different than XM510

Thanks to the friends that open my eyes to see that is OK the 1 x 72´´ tube

73,
Jorge


-----Mensaje original-----
De: Stan Stockton [mailto:wa5rtg at gmail.com] 
Enviado el: viernes, 25 de enero de 2013 10:37
Para: Jorge Diez - CX6VM
CC: <towertalk at contesting.com>
Asunto: Re: [TowerTalk] 40-2CD question

Jorge,

Following is the link to the manual on MFJ website

http://www.cushcraftamateur.com/pdffiles/XM-240.pdf

EG is the SMALLEST diameter tube and is 3/8 inches OD x 36 inches long.
EA is the largest diameter tube and is 1-3/8 inches OD x 84 inches long.
EB is the 1-1/4 inch tube and is 48 inches long.

I would carefully check your antenna using this manual to see what you have.

Stan, K5GO

Sent from my iPad

On Jan 24, 2013, at 9:06 AM, "Jorge Diez - CX6VM" <cx6vm.jorge at gmail.com> wrote:

> Hello
> 
> 
> 
> I need to order some part of the elements of the 40-2CD
> 
> 
> 
> I don t have the antenna here right now, but I made my notes of the 
> damage sections but now reading the manual I have a doubt
> 
> 
> 
> I need the EG tube of the driven element. This part is a 1   x 72    
> but in the dimension sheet I need to have 73   of this tube, so 
> something is bad in the manual
> 
> 
> 
> Anyone familiar with this antenna that can help me to determine the 
> right dimension of the section I need?
> 
> 
> 
> Thanks,
> 
> Jorge
> 
> CX6VM/CW5W
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk