[TowerTalk] Rohn 45

[Hector Garcia XE2K]

Les

I have  just a few sections of R45 lining  up,  but  what I did can be  easy to follow, your problem is not big,  I fix several  with more than that 

get one section where  the tips and bottom looks visually correct, confirm  that using a tape measure,  checking the center of the section  and make it match the tips  and  something similar  in the bottom
 the idea is to have one section as model  to start and align another and make those 2 align  first up and later down,    mark  section 1 leg A  and section 2 leg A, and  continue  making the next  checking the tips and bottom
with your  MODEL sections
that works for me, hope I can pass my procedure how I did it
My tools  , tape measure, 8 ft heavy wall  tubing that it ID  fit the  OD of the bottom   and other  BAR or heavy wall pipe  to work with the tips,  
 
J.Hector Garcia  XE2K / AD6D
Mexicali B.C  DM22fp / Heber CA 
P.O.Box 73 
El Centro CA 92244-0073
http://xe2k.net





________________________________
 From: les <lkemble at charter.net>
To: towertalk at contesting.com 
Sent: Wednesday, July 24, 2013 12:48 PM
Subject: [TowerTalk] Rohn 45
 

I am pre assembling a rohn45 tower but one section will not line up, it appears to be about 1/8 of an inch out on one leg. What is the best way to align the tower section?

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk