[TowerTalk] How to apply lube to HDX589
Steve Dyer
w1srd at yahoo.com
Thu Jun 13 11:41:55 EDT 2013
K7LXC breaks the prime directive for lubricating crank-up cables. He sells Prelube 6 on his site and recommends using it. And yes, any professional user of wire rope always lubricates their cables on a regular maintenance/inspection schedule.
It baffles me why anyone would not lube the cable with the *proper* lubricant since the cable is THE critical link in a crank-up.
It's a testament to how well the cable holds up that more failures haven't occurred. That and it's way over-sized to the load.
73,
Steve
W1SRD
________________________________
From: "john at kk9a.com" <john at kk9a.com>
To: towertalk at contesting.com
Sent: Thursday, June 13, 2013 7:12 AM
Subject: Re: [TowerTalk] How to apply lube to HDX589
Lubricating the cable does go against the K7LXC prime directive. US towers
recommends replacing the cable every three years.
Most wire rope is lubricated during manufacturing. Lubrication does two
things:
Reduces friction as the individual wires move over each other.
Provides corrosion protection and lubrication in the core and inside wires
and on the exterior surfaces.
If I owned a crank-up tower I would keep the cables lubricated and only
change them if there was noticeable corrosion or broken strands .
John KK9A
To: Bryan Swadener <bswadener at yahoo.com>
Subject: Re: [TowerTalk] How to apply lube to HDX589
From: Andre VanWyk <kr5dx at yahoo.com>
Date: Wed, 12 Jun 2013 22:45:37 -0400
I am missing something here as US Tower advises against lubricating cables.
What are you gaining by lubricating cable? I my opinion if a un-lubricated
galvanized cable shows signs of rust, it is time to replace it.
73's
NJ0F
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list