[TowerTalk] How to apply lube to HDX589 cables
K7LXC at aol.com
K7LXC at aol.com
Fri Jun 14 16:18:03 EDT 2013
> What about liberal coating with silicone lube, the spray that is dry
after a
little time. That would make things slippery and reduce inter-winding
friction/wear. This is what the "smart" folks do with their overhead door
hardware.
Yep. And smart crank-up owners as well. Silicon spray is probably an
acceptable cable lubricant. Yes, you want it to soak in and not leave a
coating that will attract dirt and grit.
> Also, anyone care to offer an opinion of stainless steel cable vs
galvanized
steel cable as regards longevity, price/performance, or any other figure
of
merit?
Of course when it comes to things that are manufactured, it's always a
matter of cost. The only potential problem with SS cables is that they can
gall, which deposits pieces of material due to friction and creates kinks
in the cable.
Cheers,
Steve K7LXC
TOWER TECH
More information about the TowerTalk
mailing list