[TowerTalk] Vertical Radials

[David Robbins]

The more connected the better... but beware, this is a religious argument with some so you will hear that the absolutely must be complete separate and you must put chokes at the feedpoints, etc... ignore them and connect them together, share wires, use welded fence wire, etc... the only thing you want to watch out for is crossing wires that aren't well connected which could cause rectification. 


Jun 25, 2013 09:25:23 AM, jms_k1sd at verizon.net wrote:

I'm going to be phasing a pair of verticals (HF2V) on a small lot. 



Should each vertical's set of radials be isolated from each other or would
it be OK to allow them to overlap. Or, would it even be more advantageous
to connect both sets of radials together electrically/physically? 



73 James K1SD

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk