[TowerTalk] Vertical Radials

[David Cole]

They should be bonded at the cross points...  Also look up a copy of the
ARRL antenna book, and look at the section covering the program called
simplefeed1...  You will be happy you did that...  :)
-- 
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/group/mixw/
for Dopplergram information see:
http://groups.yahoo.com/group/dopplergram/ 


On Tue, 2013-06-25 at 09:24 -0400, James Setzler wrote: 
> I'm going to be phasing a pair of verticals (HF2V) on a small lot.  
> 
>  
> 
> Should each vertical's set of radials be isolated from each other or would
> it be OK to allow them to overlap.  Or, would it even be more advantageous
> to connect both sets of radials together electrically/physically? 
> 
>  
> 
>     73 James K1SD
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk