[TowerTalk] Force 12 Hardware Question
Richard Thorne
rthorne at rthorne.net
Mon Sep 9 16:00:32 EDT 2013
Jerry,
I had a C3 up for 10 years and while the ubolts were a bit rusty, they
came apart just fine with a little WD-40. I do live in a dry climate
which has something to do with it I'm sure.
cycle-24.com carries galvanized ubolts.
Rich - N5ZC
On 9/9/2013 2:52 PM, Gerard Jendraszkiewicz wrote:
> Hello Everyone,
>
> My Force 12 5BA is currently down to replace a broken truss wire. I
> also plan to replace the boom to mast plate. The one I had was a the
> older 'small' style.
>
> Now this brings me to the question.
>
> The U-Bolts that hold the elements to boom appear quite rusty,
> although it appears to be just surface rust. The nuts all look to be
> in good shape. Is there any thoughts to replacing the u-bolts ? The
> replacements I have obtained from Force 12 are the same Zinc plated
> type that were OEM on the antenna.
>
> I also have new insulators, but again the old insulators look just
> fine, they are a bit weathered but seem to be in good shape. Replace
> or not to replace ?
>
> The antenna has been up for about 10 years and is a very good
> performer. Any thoughts ? I think all the old u-bolts would have to be
> cut off for replacement.
>
> Comments ?
>
> Thanks
> Jerry, KE9I
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
More information about the TowerTalk
mailing list