[TowerTalk] TowerTalk Digest, Vol 136, Issue 22

[Drax Felton]

Get a piece of foam strip at Lowes in the window insulation and weather sealing section.   Shove it between the panels.


Sent from my iPhone

> On Apr 9, 2014, at 10:15 AM, "Larry Stowell" <lclarks at nc.rr.com> wrote:
> 
> Fred
> I have looked at the MFJ window panels and can't figure out how you seal the gap
> between the 2 sashes on a double hung window, as soon as you raise the lower sash you loose the seal.
> I called MFJ and they didn't know either.
> 
> 73 Larry K1ZW
> 
>  4. Re: Fwd: Re: Re:  New windows versus my antenna wiring (Fred Keen)
>   ----------------------------------------------------------------------
> 
> 
> Message: 4
> Date: Tue, 8 Apr 2014 21:05:45 -0700 (PDT)
> From: Fred Keen <fredkeen at ymail.com>
> To: Gene Smar <ersmar at verizon.net>, "towertalk at contesting.com"
> <towertalk at contesting.com>
> Subject: Re: [TowerTalk] Fwd: Re: Re:  New windows versus my antenna
> wiring
> Message-ID:
> <1397016345.30856.YahooMailNeo at web140005.mail.bf1.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
> 
> SOME insulating glass units have argon gas, but they are in the minority. What insulates an insulating glass unit is the dead air space between the two pieces of glass.
> 
> My 40 years experience in the glass business tells me to strongly NOT try and drill thru an insulated glass unit as 1. it will destroy the air seal and allow condensation and loose insulating value, 2. it is extremely difficult for even a professional craftsman to drill thru the?two pieces of glass in an insulating unit without breakage,,,
> 
> Why not use one of the MFJ window panels? They allow you to cut to size and come with foam tape to close off the edges.
> 
> Fred
> KC5YN
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk