[TowerTalk] Hazer type elevator for non guyed 60foot towers?

[Jack Taylor]

One possibility to explore is to obtain a used bucket truck.  Awhile back I 
noticed one on Craigs list that had a 55 foot
lift.

Jack - n7oo

-----Original Message----- 
From: Richard (Rick) Karlquist
Sent: Sunday, April 13, 2014 7:11 PM
To: Howard Rosen ; towertalk at contesting.com
Subject: Re: [TowerTalk] Hazer type elevator for non guyed 60foot towers?

On 4/13/2014 2:46 PM, Howard Rosen wrote:
> see   Hazer's can only work on guyed non tapered towers ,so is there any
> other combination of "non-guyed" towers and magical assemblies that can
> bring the antenna /rotor down to ground in its original horizontal 
> position
>
> 73 Howard VE2AED

Hazer used to make a tracked version called the
Voyager.  I don't see why it wouldn't work
on a tapered tower, assuming you could fabricate
the correct mounting brackets for the tracks.

I have also tried to brainstorm a "free space" hazer (FSH)
that would not attach to the tower at all but simply
be pulled up in "free space" at a slight angle from
the tower by cables attached to the top of the FSH
so it would hang down.  A second cable would go through
a pulley mounted up on the tower such that it would pull
the bottom of the FSH horizontally into a receiver
mounted on the tower to immobilize it.  A redundant
"safety cable" could be used to prevent accidents in
case the main lifting cable/winch failed.  Has anyone
else experimented with this idea?

Rick N6RK
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk