[TowerTalk] Bolts for Orion OR2800 rotor

[Richard Thorne]

George,

Here's another option, albeit expensive.

http://www.championradio.com/Orion-2800-Replacement-Mast-Clamp.44

This is intended to hold the mast better, is galvanized and uses 
stainless steel hardware.

Rich - N5ZC


On 4/21/2014 8:15 AM, Georgek5kg at aol.com wrote:
> I need to replace the rotor-to-mast-clamp bolts on my OR 2800.   They are
> 3/8-24 x 4" Grade 5 bolts zinc plated, and are totally rusted.
>   
> Since I live on salt water, I would prefer to replace them with  stainless.
>   
> My question is: Is there any problem replacing the Grade 5, zinc plated
> bolts with stainless in this application?  Also, what is a good source  for
> 3/8-24 x 4" ss bolts.
>   
> Tnx, George
>   
> George  Wagner, K5KG
> Sarasota, FL
> 941-400-1960  cell
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>