[TowerTalk] Measuring Ferrite

[J Chaloupka via TowerTalk]

test


________________________________
 From: Jim Lux <jimlux at earthlink.net>
To: towertalk at contesting.com 
Sent: Thursday, April 10, 2014 11:47 PM
Subject: Re: [TowerTalk] Measuring Ferrite
 

On 4/10/14 2:38 PM, Jim Brown wrote:
> On 4/10/2014 1:58 PM, Earl Morse wrote:
>> I confess, I am spoiled.  I have access to a plethora of RF devices
>> such as network and impedance analyzers so I wouldn't have to make do
>> with making this measurement with a rigged up setup.
>
> Actually, measuring ferrite chokes is not nearly as easy as it looks.
> The only stand alone instrument I would trust the the HP impedance
> analyzer. All reflection-based analyzers have the limitation of greatly
> reduced accuracy as the impedance is much more than 1/5 or 5x the
> circuit Z. There are HP applications notes that address this issue.
>

True, if you want to characterize, but if you're in the "sorting by mix" 
mode, I think a lot of fairly simple test equipment can do the job. 
You're looking for mu changes of a factor of 5 or 10, and you can pick 
frequencies which work well.


For checking whether that mix 43 binocular core is within spec.. not a 
chance with cheap and cheerful.


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk