[TowerTalk] Measuring Ferrite

[Richard (Rick) Karlquist]

If you just want to identify what type of ferrite you
have, the easiest thing to do is measure the frequency
at which the phase of the impedance is 45 degrees and
then compare this to the frequency where the
epsilon' and epsilon'' curves cross over.

Rick N6RK

On 4/10/2014 1:58 PM, Earl Morse wrote:
> I confess, I am spoiled.  I have access to a plethora of RF devices such as network and impedance analyzers so I wouldn't have to make do with making this measurement with a rigged up setup.
>
>
> Earl
> N8SS
>